Wisamic Automotive Non-dismantle Fuel Injector Cleaner Kit and Tester with Case for Petrol EFI Throttle Petrol Cars

Description

Features
☆Anti-friction oil tubes, suitable for all cleaning fluid
☆Special handling one-way valves, able to seal up gas
☆Durable pressure regulating valves
☆Multi-functional valves for fluid adding and gas releasing
☆Rotate to add fluid, gas releasing speed controlled with different force level
☆Various connectors to fit for almost all the EU, Asia, USA cars and light trucks

Check fuel injection model, throttle or EFI:
EFI Model:
1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor；
2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor；
3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work；
4. Charge the cleaning fluid into the tank of the cleaner；
5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI；
6. Check all connect point to make sure there is not leakage；
7. Start the engine to clean the fuel system.

To the throttle:
To the throttle system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

The way to identify the inlet and return hose:
-. Generally speaking, inlet hose is bigger, return hose is smaller;
-. There is always a filter connected in the inlet hose side, and a buffer in the return side;
-. There is arrow on the hose to show the fuel flow direction.

Specification:
Pressure: 0-140PSI
Tank: 600ml
Case size: 42x36x12 (cm)
Case weight: 4.0kg

Package includes:
1 x Fuel Injector Cleaner
1 x Suitcase for kits

NOTE: Clean liquid is not included. Work on gasoline injector only, do not use it on diesel injector.