WILLHI WH1436H Air Humidity Controller Pre-Wired Outlet with Sensor AC 110V-240V 10A, Improved Version

Description

The WH1436H Humidity controller can turn on/off your equipment at desired humidity. This is the updated new version with simplified operation and standard U.S. outlet.
For example: Control a humidifier. Keep humididity between 70% and 85%.
Set HC=H (Humidification mode), set Lb=70 and Hb=85. When the measured humidity is below 70%, the humdifier will be turned on. When the measured humidity reaches 85%, the hudifier will be turned off.
Please notice that this is only a Humidity CONTROLLER. It DOES NOT include any humidifier/dehumidifier.

Feature:
1 YEAR Warranty without return.
Size: Approx. 125mm*91mm*40mm / 4.92inch x 3.58inch x 1.57inch
Humidity sensor cable length: 3m / 9.8ft
Humidity Measuring Range: 1% ~ 100% RH
Humidity control range: 1% - 99%(max humidity span between turn-ON humidity and turn-OFF humidity)
Control resolution: 1%
Humidity Measuring accuracy: 1%
Power Suppler: AC 110V-240V
Data retention: YES. Your setting can be remembered forever after power off
Power consumption: less than 3W
Relay contact capacity: AC 10A/240V, 10A/110V
Working temperature: -10°C - 65 °C
Note:Don t place the controller panel in humid environment for long time with the probe.
Item Include:
1 x WH1436H Humidity controller
1 x 9.8FT(3M) sensor cable
1 x power cord with NEMA 5-15 plug