White For iPhone 6S 4.7inch LCD Screen Replacement Kit Digitizer Touch Screen with Frame Display Assembly with 3D Touch & Repair Tools

Description

Only fit for iPhone 6S 4.7inch

Note:
1.Do not put the screws to wrong place, especially in Step 13, or it will ruin your logic board.
2. The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable from your old screen, so total three flex cables.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away
Please leave phone alone overnight and see if this problem persists in the morning.

Package Include:
1* LCD Screen for iPhone 6S 4.7inch
1* Phone Ring Stand
1* Set Repair Tool Kits
1* Retail Box
1* Instruction
1* Temepered Glass