VDIAGTOOL Brake Fluid Tester Pen Accurate Oil Quality Check Pen for DOT 3 DOT 4 Dot 5 Detection Indicator 5 LED Lights

Description

Instructions:

1. the green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified
2. the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
3. the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
4. LED red flashing: battery replacement
5. LED yellow: low moisture content, check again in six months
6. LED green: brake fluid lines / cell row

Technical parameters:


Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous. Attention :

1. Replace battery if the gree LED not light any longer after you press power on button.Wash the test probe with tab water after use.
2.In case of skin contact with brake fluid,thoroughly wash the affected skin or clothing with water. 3.Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!