Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version

Description

Vanker Handheld Steam Inhaler

Usage:
1. Remove the top cover, take the cup and silicon gasket out.
2. Add 30ml purified water into the Water Chamber, the water level should be 3-5mm above the external silicon ring.
3. Fill the medicine cup half-full. put the cup into the chamber.
4. Re-install the top cover securely with the silicon gasket.
(Note: the best atomisation temperature in the chamber is 30℃/8℉)
Please use saline water or WARM(NOT boiling) water to sterilize the accessories.

Note:
1. Pease add purified water instead of running water into the water chamber.
2. The machine should be cleaned promptly after use.
3. Please check whether the machine is damaged, cracks, est. before and after using the product. If yes, please contact our customer service for replacements.

Troubleshooting:
1.If the machine doesn t work or red light flashes, check whether there s enough water in the water chamber, ensure that the Atomizing Cup can touch the water surface.
2. If completely no mist or small mist, check the following:
a. If the water tempreature is below 20℃/68℉, replace it with water at 40℃/104℉.
b. If the medicine liquid has a high concentration or small quantity, it needed to be diluted with normal saline before operate.
c. If the liquid for atomization contains large particles/impurity/precipitat/flatage/colloidal particles, the machine would not work.
d. Change a NEW cup, if no mist after few uses.
3.If the top cover does not fit, please ensure the silicon gasket been placed tightly.
4.For water leakage issue, please don t make the machine tilt.

Specifications:
Ultrasonic frequency: 2.4Mhz; Operation voltage: DC12V
Size of Atomized Particle: 0.5-5 micron
Cup capacity: 10ml; Vessel Capacity: 25ml

In the box: 1* Machine ; 1* AC Adapter; 2* Face Mask(1 Large, 1 Small); 2* Mouthpiece; 5* Cup; 1* Manual