Ulincos Touch Switch UT19T1 Stepless Dimming Switch DC 6V to 24V Blue LED Suitable for 19mm 3/4" Mounting Hole

Description

What You Get:
1 * Touch Switch
1 * Instruction

What s the Touch Switch:
Touch switch, just touch it! It is different from the push button switch. You don t need to push anything, just touch it! Like touch your smartphone!

The touch switch is rated for 7A MAX /DC 6-24V.

What s the Touch Switch Used for:
Most often the Stepless Dimming switch is used for lights (Such as critical lights, chassis lamp, dome light)

About Stepless Dimming type:
1.The light is off when connecting to electricity. Click it (time < 550ms) once to initiate it with the light on. Click it again to let it be off. Continue to cycle.
2.The initial brightness is 50% of the maximum brightness.
3.Touch and hold it (time > 550ms) to initiate stepless dimming control. The brightness increases when touching and holding, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at maximum level. The brightness decreases when touching and holding again, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at minimum level. Continue to cycle.
4.Click and Holding Touch can be used anytime. There is no interference between these two functions.

What s Note:
*The touch switch doesn t work with wet or damp fingers.
*The touch switch cannot be used in AC circuit. Don t exceed the rating volts!

Specifications:
Head diameter: 7/8" ( 22mm )
Mounting hole size: 3/4" ( 19mm )
Depth inc contacts: 1.1" ( 28mm )
Switch Type: Stepless Dimming
Input Voltage: DC 6V-24V
Output Current: 7A MAX
LED voltage: DC 6V-24V
LED color: Blue (always ON)
Head shape: Flat
Enclosure material: Stainless Steel
Protection level: IK10
Electrical life: 500,000 cycles
Operating Temperature: -20℃ ～ +55℃