TOPGREENER TSOS5-W In Wall PIR Motion Sensor Light Switch, Single-Pole, Fluorescent 500VA/ Motor 1/8Hp / Incandescent 500W NEUTRAL WIRE REQUIRED, White

Description

TOPGREENER TSOS5-W Motion Sensor Light Switch detects room occupancy to automate the On Off Light Control for energy saving and make life easier.
Delay Time Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes
When you put the slide switch button to AUTO mode, TSOS5 PIR motion-activated sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time.
Coverage up to 980 sq. ft
The maximum coverage area is up to 980 sq. ft., 150-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. Passive Infrared (PIR) sensors detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.

With TOPGREENER sTSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on at Daylight even when motion is detected.
This operation can be done easily by sliding the sliding switch on the front of the motion sensor. Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF. TOPGREENER s TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!

Specifications:

• Incandescent: 500-Watt @ 120 VAC
• Fluorescent: 500-Volt Amp @ 120 VAC
• Motor: 1/8HP @ 120 VAC
• Coverage: 150 degrees, 450 square feet
• Single-Pole use only
• Neutral wire required