TIROL Digital Car Automative Vehicular Auto Battery Tester Checker Analyzer 12V 100A

Description

The top-mounted rocker switch allows for easier operation. Other convenient features include super-grip battery clamps that are both heavy duty and color-coded, easy-to-read meter that is accurate and shock resistant as well as a baked enamel steel case which is ventilated to keep it cool. Introduction 1. This product is a kind of portable instrument used to test batteries for determining their capacity state which is divided into tree section , namely , the "consumed" , "recharge" and "normal" . All these are directly and speedily shown through direct perception on the graduated disc to judge the quality of a battery . In addition this instrument can also check whether the charging system is in good or bad condition . 2. Structure and Characteristics . This product consists of D.C. Voltmeter ,load resistance , instantaneous contact switch , housing and testing clamps .The capacity state of a battery is shown in 3 sections: red, yellow , and green to show the 3 states , namely , the "consumed" ,"recharge" and "normal" respectively . 3. Thechnical parameters Range of parameters: The rated voltage of the battery to be tested : 6V , 12V Rated capacity of the battery to be tested :200-1000CCA Type of indication : 3 sections , red , yellow and treen to show the "consumed" , "recharge" and "normal" state respectively. Way of testing : manual instantaneous contact type . Each measurement should be done within 10 seconds. Precisions:2.0 level Measuring limit : 0-16V This product meets the enterprise standard. Testing preparation : 1. During the test , its surrounding should be well ventilated. 2. Clean the measuring ends of the battery to be tested. 3. Check the battery for broken part or damage . 4. If it is necessary to remove the battery from the vehicle , first remove the earthing end of the battery , and other accessories are taken out carefully so as to avoid electric are.