THINK SOGOOD Electronic Door Lock Keypad Keyless Smartcode Digital Home Security Lock

Description

Technical Parameters:

Dimensions:160L * 68W * 36H(mm).

Operating Voltage:DC6V, 1.5V, 4 "AA" Alkaline Batteries.

User Management Capacity:56 Passwords + 56 RFID Card + 5 Remote Controls

Center Distance:60mm or 70 mm.

Door Thickness:30mm - 60mm.

Remote Control Distance: 20 meters(Need to long press the unlock key until the door is unlocked)

Read Card Distance: ＜25mm

RFID Card Type: EM4100 card(125KHZ)

How to program it?

Program a code: Input  Master User password(00123456#), door open, then input *1#1#UUPP#(UU is the user code，password is PP)before the keypad light turns off.

Add a RFID card: After Master User verification, door open, then input *2#1#UU# (UU is the user code, 01 & 02 have been used, you can add other 54 codes), then put the card close to inductive zone.

Add a remote: Master User verification, input *3#1#U#, U is user code（1-8, 1 has been used, 7 codes available. it s a green light in the position of number 2356, then press the unlock key of the remote, the whole keyboard displays blue light, one long beep means success.

Automatic normally open: After Master User verification, input *9#2#1# or hold # key for 3 seconds.In this mode, the lock won t automatically lock after open once.

Modify the  Master User code: Input *5#UU#CP#NP#(UU:user code; CP:current password; NP:new password)

Code users can change the code by their own, no need to know master code, the one who knows master code can easily add or delete normal users.

Restore factory setting (two methods):

1. Open the battery cover, press and hold the initial button 3 seconds, all users are deleted, master user password was recovered to 00123456.

2.Input master user password to verify, door open, then input *9#99#999#, the system will be recover to initial status.