Teorder SATA to USB Adapter Cable Universal Serial Bus 3.0 Series ATA III Adaptor with UASP USB-IF 22Pin(7Pin+15Pin) 21 Converter for 2.5" Hybird Hard Disk HHD HDD SAS ODD and SSD

Description

Product Description/Features:

1,Teorder USB3.0 to Sata Cable adapter Pass USB-IF USB 3.0 Bus-power Logo Certification(<2.5mA,under suspend mode),Meet EuP Directive 2005/32/EC Lot 6 Standby and Off Mode Losses IM regulation(<0.5W,EuP2013).

2,Support USB 3.0 U0/U1/U3 power states,USB2.0 LPM/suspend mode and Support dynamically spin-down/power down Hard drive when IDLE.

3,Build-in 5.0/3.3 ldo on both package,Support single 30MHz clock input and Support SPI or EEPROM for Vender Specific VID/PID/ application

4,Support firmware update through USB port to SPI flash and Compliance with USB Mass Storage Class Spec Rev1.0,Bulk-Only Transport.

5,Suport ATA/ATAPI packet command set and pass-through command ,Support GPIO pins for customer application and Support PWM driver operation on GPIO7 .

Teorder USB3.0 to SATA Specifications :

1.Input ports:1xUSB 3.0

2.Output ports: 1x7+15pin Slimline SATA

3.Power input: 100-240V, 50/60Hz.

4.Transmission speed: Upto 5Gbps

5.Dimensions(in) :21

6.Weight (lb):0.08

Package Contents:

1)1xUSB3.0 to SATA adapter cable

Warm Tips:

1,Make sure you power the USB port during the hook in order for it to work properly

2,Make sure that the Hard disk is 2.5 and HDD is OK

3,1 year limited warranty.