TABIGER Soldering Iron, Electric Soldering Iron 60W 110V, Adjustable Temperature Welding Tool with ON/OFF Switch, Power Indicator Light for Variously Repaired Usage

Description

Tabiger Soldering iron with Adjustable Temperature 200℃ to 450℃ (392℉ to 842℉), LED Indicator and ON/OFF Switch, your wonderful choice for soldering.

Specification:
Model: B01
Power: 60W
Working Voltage: AC110V
Temp Range: 200℃ - 450 ℃
Switch ON/OFF: Yes

The steps for the soldering:
1. Clean the soldering parts as well as the iron tip, connected it with power.
2. Turn the switch on and adjust its temperature slowly to warm the soldering iron
for about 1 minute.
3. Touch the soldering iron tip to the component you want to solder. After a second
or two, introduce the solder to the joint area and heated it to flow.
4. Remove the solder first. Then, remove the iron. Make sure the joint remains
stationary while it cools.

Warning:
1. It is important to keep the tip of the soldering iron clean while using it.
2. DO NOT lay a soldering iron down on any surface. A soldering iron
should either be placed on a stand or sealed with a heat resistant cap
after every use.
3. The tip of a soldering iron is very hot. Be sure to wear safety glasses,
keep loose clothing and hair out of the way, and be careful with your
fingers.
4. Have a rest after every 10 minutes, it is good for your eye as well as the
soldering iron.