Sunnyscopa DIY Type A Film-free Waterslide Decal Paper A4 10 sheets with Glue W1

Description

Print and transfer the ink. A few simple steps and you can customise just about everything. You can now display your own favourite image on objects such as plastic models, toys, mugs, glass, car and much more! Your imagination is limitless. Simply print with a laser printer at home and transfer the ink using only water and heat. No need for expensive heat press machines or bulky printers. Our film-free range is different from standard decals as you can remove the final film, leaving only the ink. This is especially ideal for surfaces that would show the edges of the decal film. The transferred ink is also strong enough to withstand abrasive force and heat. Is it washable? Sure, you can even place the product in dishwasher. Our product is the world s first and was awarded "Product of the Year" from SGIA expo 2014. To apply the decal, 1. Print as mirror image on the glossy side of the decal. 2. Place the cut out image in water and take out. 3. Apply glue on the surface and mount the decal face down once the backing starts to loosen. 4. Slide the backing to remove, leaving only the film. 5. Smoothe out the decal and squeegee out the excess glue and water remaining. Use alcohol swab clean the decal. 6. Dry for 2-3 mins with a hair-dryer or for 10~30 mins with oven at 70~100C. 7. Scratch the corner of the film to remove or use a craft knife if needed. Clean for the second time with alcohol. 8. Place the finished product in oven at 200~250C for 10~20 mins to strengthen the ink. 9. Voila! You are done.