STEEL SEAL HEAD GASKET REPAIRS,MCP,USED 4 CYLINDERS,Engine Sealer,cracked heads, head gasket failures, cracked blocks, radiators, heater cores and water pumps.

Description

How to use? Method 1: Simple Method. Keep the antifreeze 1. Calculate the amount of Engine Seal you need based on the coolant capacity of the car. The cooling system of a modern car has 10 to 20 quart coolant capacity. The amount of Engine Seal you need is about 2.5% up to 5% of the total amount of coolant. For example if the coolant capacity is 20 quarts, you only need 1/2 quarts up to 1 quart of Engine Seal, MCP 2. Start the engine and let it up before the Engine Seal is added. Then remove the radiator cap and add the amount of liquid Engine Seal you have calculated. The engine continues to run until the leak is sealed. In many cases, leaks can be detected when the engine is running. Visible vapor may come from the exhaust. A warped head or broken block may allow coolant to leave the block in a visible stream or drops. Sealing takes about ten minutes and may usually be visibly confirmed by the absence of the vapor or liquid previously noticed. After the leaking stops, the engine should be stopped and allowed to cool. The sealant has now formed a permanent barrier and the leak is cured.