SETmell Wireless Home Security Driveway Alarm and Doorbell, 1 AC Adapter & 1 Long Range Reciever & 2 PIR Motion Sensor Detector Weatherproof Patrol Infrared Alert System Kit

Description

SETmell Wireless Household Alert Security System is an easy-to-install and DIY home security system, which is perfect for your office, apartment or home. Just rest in absolute easy!

To avoid false alarms:

1. Mount the sensor away from direct sunlight, such as under an overhang, covered area, or in a non-metal box.

2. Mount the sensor away from the strong wind , that may lead to wrong sense .

3.It might be helpful (if you haven t tried yet) to move and mount the sensor in a higher position, then angle the sensor down to face the driveway. This may hopefully reduce the interference from objects in the distance and from sunlight.

4. Lastly, if none of these suggestions help, try tapping over a little of the sensor area with black tape as this may reduce sensor sensitivity.

Before using this product please note that there is a on/off switch at the side of the receiver, be sure to switch the button to the "ON" position when using the alarm kit. also need to check the power supply for the receiver and sensor are working properly. If the product has out of power, they need Re-pairing the function.

Specification:

Power Supply (Receiver): 3 x 1.5V C batteries (not included) ;

Power Supply (PIR Sensor): 1 x 9V batteries each (not included)

PIR Sensor Detecting range: 5 - 8 m / 16 - 26 ft

Communication range: 100m / 300ft (IN THE OPEN AIR)

Weather resistant of PIR Sensor: IP44

Ring Volume of Receiver: 100dB ( within 0.5 m / 1.5ft )

Box Contents:

1 x Receiver

2 x PIR Sensor

1 x AC Adapter

4 x Screw

1 x Instruction Manual