RGB LED Strip Connector Kit 4 Pin With Extension Wire UL Listed 9.8 Feet/3 Meter 22 Gauge 4 Conductor, DIY Both Strip to Power Lead and Strip to Strip Jumper, Non-waterproof Use. 5 Connector Packed.

Description

1.Package Include

5 PCS RGB LED Strip Connector Terminal 10mm 4 Pin Non-waterproof
9.84 Feet / 3 Meter 22 Gauge 4 Conductor Extension Wire UL Listed

2.Special Benefit you can get with it.

Connect non-waterproof rgb strip light easily. Save your time.

You will be no more limited by distance between strip light to Controller or dimmer. This connector allow you to cut any length wire according to project s actual requirement, then attach wire to connector easily without stripping insulation.

With 2 connector and a wire, you are able to diy a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.

No more worry strip light moving out of connector, the connector s teeth will pierce and grip the PCB tightly.

3.Tools needed to use

A pliers only

4-1 How to make a Strip-To-Strip-Bridge (jumper) connector ?

1. Cut a wire for the length you want
2. Insert wire into connector s wire end
3. Clamp cap down
4. repeat step 1-3 to add another connector to the wire

4-2 How to make a Strip-To-Controller connector

1. Cut a wire for the length you want
2. Insert wire into connector s wire end
3. Clamp cap down

Working Voltage: <=24V
Max Current of Pin: 5A
Pin Quantity: 4 pin
Workable Strip Light Width: 10mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃