QIJIE 5050 RGB LED Strip Connector 4 Pin for Waterproof 10mm Flexible Tape Light, Board To Wire (22~20AWG), Applicable To Digital Strip WS2813, Terminal Only, No Wire Included, Pack of 10 PCS

Description

QIJIE 4 pin LED light strip connector is a non-stripped solution to quickly connect waterproof 5050 RGB strip light to 4-conductor flat wire. No soldering, no stripping,no twisting. Just simply place waterproof tape light above the pin(no need remove waterproof coating)and press cap down, the pin will go through FPCB from back and contact copper layer.When connecting to wire, the pin can pierce the insulation of wire and contact the cable core inside. All this can be done with a pliers which means it can really free you from difficult and dangerous solering iron operation.

1)LED Strip Type It Can Work With

• Normal RGB LED light strip with waterproof coating above diode.
• Digital chasing LED strip like WS2813
• Other IP65/IP54 LED strip light 10mm with 4 solder pad.

SPECIAL NOTE:This connector NOT for PURE SILICON waterproof coating LED strip light. If you have this kind of strip light,buy our IP20 version which is still workable without stripping waterproof layer. The link is: https://www.amazon.com/dp/B01N9QXW04

2)Package Include

LED Strip Connector 4 Pin:10 PCS

Kindly Note: this package does not include any wire, for RGB cable,you can go to this link: https://www.amazon.com/dp/B01L3F4ZHE

3)Tools Needed

A pliers

4)Technical Data

Working Voltage:Below 24V
Max Current of Pin: 5A
Pin Quantity: 4 pin
Workable Wire Gauge: 22~20AWG / 0.34~0.54 mm²
Workable Strip Light Width: 10mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃
Connector Dimension: 24.3*14.6*7.7 mm