Phobya UC-1 LT Intel CPU Liquid Cooling Block - Black Edition (Fits Intel Sockets 775, 1155, 1156, 1366, 2011)

Description

At the core of the Phoby UC-1 lies a new middle layer, based on the patented micro channel recirculation technology which was already successful in the UC-1 s predecessor. Further development of this design for use with a slot structure in the cooling plate allowed the creation of a CPU water block which plays amongst the best on the market. Not only excellent cooling performance, but also outstanding design and quality make the water block unique and innovative. Technical aspects: 56x56mm in size, the cooling plate features an extremely fine slot structure which is one of the most advanced on the market. 68 cooling channels fill a surface area of 35 x 31.3mm, each only 0.2mm wide. The fins in between the slots also have a thickness of only approx. 0.2mm. Above the slot structure, an approx. 1mm thick middle plate is inserted. It serves two purposes: 1: In the middle an injection slot is placed, perpendicularly directing the coolant collected from the inlet chamber into the cooling channels 2: At the bottom of the middle plate coolant recirculation channels are implemented. These channels increase flow rates and create mico-turbulence caused by cross-flow, further increasing cooling performance A wide array of tests was conducted to determine the one design which lead to the ideal result. Width, length and number of injection slots were varied until the desired result was achieved. An innovative coolant drain system rounds off the design of the water block, featuring two recirculation channels from the outlet collection chamber to the outlet. The connection threads are spaced 23mm apart (center to center), allowing the use of tubing with an outer diameter up to 16mm! (1/2" x 3/4" Compression Fittings are NOT compatible). As a result of this well-rounded and innovative design, the Phobya UC-1 achieves sensational cooling performance on single-, dual-, quad- and even hexa-core CPUs!