MYSWEETY CNC Spindle Motor Kits, 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router

Description

1.Spindle Motor:
Size: 80mm
Power: 2200W
Voltage: 220V
Frequency: 0-400Hz
Speed: 0-24000rpm
Water Cooling ER11 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Grease Lubrication
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were
connected to the inverter power supply (U, V, W), 4 connected inverter ground

2.Inverter:
Type: 2.2KW/220V
Input: 220VAC/50Hz
Output: 0-220VAC 3-phase
Frequency: 0-400Hz
Size: 168x124x161mm

3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")

4.Water Pump:
Voltage: 220V
Structure: Single-stage Pump
Pressure: High Pressure
Application: Submersible
Usage: Water

5.5M Water Pipes:
Length: 5M
Can be connected between Water Pump and Spindle Motor

6.Spindle Motor Clamp Mount:
Diameter: 80mm
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing

Package include:
1 x 2.2KW Spindle Motor
1 x 2.2KW VFD
1 x 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
1 x 70mm Brush
10 x Drill Bits

How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.