kuman 5 inch Resistive Touch Screen 800x480 HDMI TFT LCD Display Module with Touch Panel USB Port and Touch Pen for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+ SC5A

Description

Tips for driver:
After install the driver that could get the touch function work.
1.)Step1, Install Raspbian official mirror
a)Download Raspbian official mirror（latest version）:
https://www.raspberrypi.org/downloads/

b)Use"SDFormatter.exe"to Format your TF Card
c)Use"Win32DiskImager.exe" Burning mirror to TF Card

2.) Step2, Clone my repo onto your pi
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git


chmod -R 755 LCD-show
cd LCD-show/

3.)Step3, According to your LCD s type, excute:
In case of 5" LCD
sudo ./LCD5-show
If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi
Wait a few minutes,the system will restart automaticall , enjoy with your LCD

Note: The premise is that raspberry pie is needed to connect to the network.

If you are operating without conecting the network, you need to use the additional methods we provided (The drive files and installation methods are included in CD), or contact our customer service staff.

Features:
1)5.0" TFT LCD Module, Resolution 800x400, SSD1963 Controller
2)LCD Type: TFT Transmissive Normal White super wide viewing angle
3)LCD Panel: HannStar HSD050IDW1
4)Interface: 8/16bit parallel bus interface
5)PCB Color: Blue
6)On board DC-DC Boost regulator TPS61040 to provide power supply to LCD backlight
7)LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace
12)Power Supply is NOT included.

Package Contains:
5inch HDMI LCD x 1
HDMI adaptor x 1
Touch pen x 1
USB type A plug to micro B plug cable x 1
RPi screws pack (4pcs) x 1