Description
Ripping down large panels into smaller more manageable workpieces is one of the trickiest, most intimidating, and expensive steps of any wood project. Even if you re ripping with the nicest table saw, you re still forced to lift large heavy panels, balance them carefully to avoid binding and bowing, while at the same time trying to support the finished workpieces and waste material as they exit the saw. There is a faster way. There is an easier way! There is a better way. Introducing the all-new Kreg Rip-Cut. The Rip-Cut is an incredibly handy tool which speeds and simplifies the process of ripping down large plywood and MDF panels. No measuring, no marking, no chalk lines-the Rip-Cut quickly and easily attaches to almost any circular saw, letting you cut pieces from 1/8-Inch up to 24-Inch wide with tremendous accuracy. The Rip-Cut is a no-nonsense, straight forward, accessory for your circular saw. It features a durable design including a solid aluminum guide rail, an easy-to-read adjustable scale, and a reversible guide arm which works whether you re left or right handed and whether your blade is on the left or right side of the saw. It s an incredibly easy, precise, and affordable way to break down large panels for almost any project.
Ripping down large panels into smaller more manageable work pieces is one of the trickiest, most intimidating, and expensive steps of any wood project. The Kreg Rip-Cut (model KMA2675) is an incredibly handy tool that speeds and simplifies the process of ripping down large plywood and MDF panels. No measuring, no marking, no chalk lines — the Rip-Cut quickly and easily attaches to almost any circular saw, letting you cut pieces from 1/8-inch up to 24 inches wide with tremendous accuracy.
The Rip-Cut is a no-nonsense, straightforward, accessory for your circular saw. It features a durable design including a solid aluminum guide rail, an easy-to-read adjustable scale, and a reversible guide arm that works whether you re left or right handed and whether your blade is on the left or right side of the saw. It s an incredibly easy, precise, and affordable way to break down large panels for almost any project.
Specifications
| Materials | High quality aluminum; impact resistant plastic polymer |
|---|---|
| Aluminum Guide Rail | 3 inches wide x 30 inches long |
| Saw Sled | 6-1/2 x 8-1/2-inch saw platform |
| Guide Arm | 2 inches wide x 10 inches long Minimum 5-inch edge bearing at blade entry Minimum 3-inch edge bearing at blade exit |
| Cut Width | Minimum — 1/8-inch Maximum — 24 inches |
About Kreg Tool Company
In 1986 Craig Sommerfeld was in the process of building his house and needed to find a way to attach his doweled face frames to his kitchen cabinet carcase members. A tool and die maker by trade, but a woodworker out of necessity, Craig had a problem. Not wanting to nail them on and then fill with putty, he designed and built "Craig s Jig" which was a single-hole pocket hole jig crafted from steel and aluminum that allowed him to attach the face frames from the inside of the cabinet where the joint could be hidden from view.
In the intervening years, Kreg Tool Company has emerged as the leader in Pocket Hole Technology. From the manual Kreg Jig to the fully-automatic Pro Series machines, Kreg offers a simple solution that has changed the way thousands of woodworkers join wood.
KMA2675 Rip-Cut
At a Glance
- Connects to most circular saws — right or left blade
- Reversible guide arm for right or left hand use
- Rips cuts from 1/8-inch to 24 inches wide
- Rip sheets of plywood in half in just one cut
- No measuring, marking, and no chalk lines
- 100 percent guide support through entire cut
- No need to remove Rip-Cut when doing cross cuts
- Quick and accurate adjustments — no tools required
- Lightweight/sturdy design for use on the job site
Customer FAQs:
Question: I want to order 100% authentic Kreg KMA2675 Kreg Rip-Cut from your store. How I can place my order in Pakistan?
Answer: Our products are 100% imported and authenticated. To place order just either contact with us or place your order online. One of our sales person contact with you.
Question: Do you have physical store of Kreg KMA2675 Kreg Rip-Cut in Pakistan?
Answer: No, you can only place order online because we import from USA as get order.
Question: How much more time you will take to deliver, once you get my order?
Answer: After order confirmation we do our best to deliver in 3 to 4 week.
Question: All prices are connfirm and accurate? How I can get exact Kreg KMA2675 Kreg Rip-Cut price in Pakistan?
Answer: We do our best to list exact prices of all products but since dollar fluctuate in Pakistan so sometime we update at the time of order confirmation.
Question: Is there some discount I will get at the time of placing order?
Answer: For discount we usually send discount coupons. To get discount coupons of Kreg KMA2675 Kreg Rip-Cut you can sign up our newsletter.
High Quality Goods
We are sourcing products from leading websites in the USA to ensure the highest quality for our end product.
Support
We have a team of professional sales representatives who will assist you in identifying the right products from Amazon.
Express Shipping
Upon receiving your order, we will expedite the shipping process by placing the order promptly and ensuring timely dispatch from the USA.
Secure Payments
Your payment will be securely held with us, and in the event that you receive an incorrect or damaged product, we will issue a refund.