IVYX Scientific Lab Incubator, Cooling and Heating 2-60C 25L/0.88 cu. ft. Cap

Description

This incubator functions as both a cooler and a warmer by means of a thermoelectric (Peltier) system. It works without a compressor and is therefore 100% CFC/HDFC free. Despite its small size, its interior volume is 25L and can accept bottles and flasks up to 2L. Two removable shelves create 3 platforms. The desired temperature is set on the digital LED display, and the incubator immediately starts heating or cooling, while accurately monitoring the temperature inside and displaying it on the LED panel.

HEATING

The mini incubator can heat samples up to 60C while using only 55W at 110V. A temperature gradient is present inside the chamber: the temperature at the top shelf is the set temperature; the middle shelf is 2C below that; the bottom is 3C below that (see graph). Within each shelf, the temperature only fluctuates by 0.5C.

COOLING

The mini incubator is able to cool down to 2C, using only 60W at 110V. Depending on the room temperature and humidity, it may not cool down all the way to 2C. Again, a temperature gradient is present: the top shelf reaches the preset temperature (lowest is 2C); the middle shelf is 1C below that; the bottom shelf is 1C below that (so close to 0C at the lowest setting). Within each shelf, the temperature fluctuates by only 0.5C

SMALL FOOTPRINT

With a small footprint of 15 in x 13 in x 18.5 in, this mini incubator will not take valuable space while having a roomy 25L (9x14.5x10.5 in) chamber volume.

PORTABLE

At only 16 lbs and with a built-in handle, the mini incubator is easy to move around. A 12V DC car power cord allows the unit to heat or cool your samples on the go.