Heads Up Display LESHP HUD Display W02 with OBD2 Interface Plug Speeding (MPH/KMH) Fuel Consumption Indicator Projected Driving Mileage Warning

Description

Specifications:
Display type:digital
Baby for:All conform to the second generation of vehicle automatic diagnosis system (OBD II) model
Product Size:150*85*14mm Environment temperature:~40c+80cAtmospheric pressure86-106kpa
Alarm sound level:>>=30db
Working voltage:9v~16vdc(12vdc/70mA)
Display project:Speed/engine speed/instantaneous fuel consumption/engine temperature/battery voltage
Speed display:Projection display car speed; The safest way to avoid lower the head to watch Engine speed:Show car engine speed state Instant oil
consumption:Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip:In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Battery voltage:When the battery voltage is lower than/when to 12 v, warning will light up to remind
Engine temperature:Water temperature reached 115 degrees automatically alarm and light up
Shift hint:When the engine speed and speed reaches a certain scale,tips to save fuel consumption increase gear
Km unit:The international system of units, the general use kilometers per hour, with km/h
Buzzer mark:According to the switch can be opened and closed buzzer sound
Methods of pasting the film:
A . equably water the place that the film will be pasted on
B . rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around .
Package Content:
1 x Host machine of HUD
1 x Reflecting film
1 x OBD II connecting line
1 x Non-slip mat