Green-state 1080P PS2 to HDMI Adapter Converter with 3.5mm Audio Output + 5 Feet HDMI Cable for HDTV HDMI Monitor

Description

Note: For the adapter to work, be sure to connect its mini USB port to a USB power source (USB port or USB charger) using included USB cable.

Instrunction:

1).Connect your HDMI cable from your TV to the PS2-to-HDMI converter unit. Connect the PS2-to-HDMI converter unit to the PS2 output. Connect the USB cable to the PS2 and a USB wall adapter. The USB cable and connection provide 5V power to the unit. If you want to keep the sound off the TV so you can play without disturbing anyone, plug a set of headphones into the 3.5mm Audio Output port of the PS2-to-HDMI converter unit.
2) The PS2 must setup for Component Video Output (Y Pb Pr) as opposed to RGB output. If you can t see anything on your TV when using this, you probably need to go into the Configuration Settings (load PS2 without a disc) and scroll through the options to change this. If you want to do this by feel because you don t have any devices that will allow an older connection, load the PS2 without a disc and wait 15 seconds or so, press down once then X, press down three times then X, press left or right once then X. At this point, I d reset the PS2 if the video doesn t come in with some crashing waves sounds. I also changed my screen size to "Full" instead of 16:9 or its original 4:3 setting. The 16:9 setting only took up a small portion of the screen, and "Full" seemed to pretty much do the trick.

ADAPTER SPECIFICATIONS:

1. Dimensions: 34 x 73 x 14 mm
2. Net Weight: 30g
3. Power Consumption: below 1W
4. Supported Video input Mode: 480i, 480p, 576i
5. Supported HDMI output Mode: digital HDMI video/audio signals (Pass through)
6. Input Connector: PS2 AV Multi Out Plug x 1
7. Output Connector: HDMI Connector x 1, 3.5mm Stereo Audio Jack x 1

Package Includes:
1x PS2 TO HDMI Converter
1x USB Cable
1x User Manual
1x 5 Feet HDMI cable