FLOUREON 10A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port LCD Display 12V/24V

Description

Specifications:
Working Temperature: -35°C to +60°C
Self consume:<10mA
Float Charge: 13.7V(default,adjustable)
Discharge stop:10.7V(default,adjustable)
Discharge reconnect:12.6V(default,adjustable)
Size:133x70x35mm
LEDdisplay. PWM battery charging. Adjustable controlling parameter of the system

Note:
1.The function of the controller is to protect the voltage overshoot and discharge.
2.When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output.
3.12.6 v is to restore the discharge voltage.
4.When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection.
5. After the battery discharge, the battery outside will flash, this is to remind the user, the configuration is not reasonable, it need to take battery connection.
6.The controller normal voltage of 10.8 v to 13.7v. This two voltage fluctuation, you can be set manually.
7.Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
8.the regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
9.Let the children keeps far away from the storage battery and the controller.

System connection:
1. Connect the battery positive and negative to the controller.
2. True and negative load access to the controller, pay attention to can not be reversed.
3. Connect the solar panel to the controller correctly.
Please follow the above sequence in strict order, otherwise it may damage the controller. The disassembly order is the opposite of the wiring sequence.

Package Includes:
1 x Solar Charge Controller
1 x User Manual