CNC Router Machine, DIY CNC Engraving Machine with 3 Axis PCB Acrylic Wood Carving Milling Engraver Machine(Working Area 130x100x40mm) + 3 Mill Engraving Bits

Description

Note: It requires some professional mechanical knowledge, so make it not the best choice for a beginner. For study and research, it is not suitable for production use.

Feature:
1.This is a mini CNC engraving machine, use for study and research.
2.Engraving machine is designed for processing Industrial or hobby prototype building, building model making, PCB, advertising Signs, artwork, crafts, aircraft models, RC model parts, etc.
3.Requires self-assembly and commissioning, assembly requires a certain mechanical knowledge, And the final quality of the assembly and commissioning of a great relationship.
4.Included all the components, installation wrench, just to assemble their own, no additional components can be used.

Specification:
Dimensions: 250 * 250 * 270mm
X,Y,Z Working Area:130 * 100 * 40mm
Carving stroke: 130 * 100mm (5.1 * 3.9 )
Stepper motor: 42 stepper motors
Voltage: 24V 5A
Spindle: 42mm (1.7 ) diameter, 775 motor

Package include:
1x Engraving Machine
3x Mill Engraving Bits
(Please contact us for English manual after you purchased)

Note:
1. This part is usually defined in the X axis is the column on the horizontal axis, the Y axis is the base, the Z axis is vertically up and down. How to set the positive and the negative direction, it depends on your personal habit.
2. If there is no adjustment of the 3 axis, it may be stuck, sliding is not smooth, then loosen the screws, horizontal reciprocating drive until smooth, and then gradually tightened it.
3. ARDUINO UNO (blue plate), do not need access to power supply, access to 24V power is strictly prohibited.
4. Motor jitter, noise, can t walk normally, or can t be reflected in the load can go, plus the load can t move. It means the stepper motor line is not connected or DuPont thread on the control panel is not plugged in.