Ceatech 15mm x 25m Thermal Conductive Tape Double-sided Adhesive Cooling Tape for Heat Sink LED Strips, LED Tube, IC Chip-set

Description

CEATECH only sell high quality thermal conductive tape. You will be pleased to get right one.

Specification:
Dimension: 15mm x 25m (Width x Length)
Glass fiber thickness: 0.2mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-20~+120 °C

Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (80-120℃ ) can work for a minimum of 5 years.

Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.

Package included:
1 Roll Thermal Conductive Double-sided Tape