Carrep Mini Car OBD2 OBDII Scan Tool Auto Diagnostic Scanner Code Reader/Scan Tool Check Engine Light for IOS & Android

Description

For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant.
4 easy steps to setup:
1) Download the proper App for your device: Torque Pro or DashCommand (Android), DashCommand (IOS)
2) Connect the Code Scanner to the car OBD interface. The scanner power light will flash and then standby. (Please turn on your car when connecting, otherwise, the App will not connect successfully. )
3) Connect your device to the WIFI network of the scanner.
4) Launch the APP and configure it with scanner.
Multiple Protocols Support:
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
SAE J1939 CAN(29bit ID,250*Kbaud)
USER1 CAN(11*bit ID,125*Kbaud)
USER2 CAN(11*bit ID,50*kbaud)
With proper APP installed on your smart phone, you may have following parameters read out from your vehicle:
Vehicle Speed
RPM
Fuel Consumption
Engine Coolant Temp
Fuel Pressure
Calculated Engine Load
Throttle Position
Intake Manifold Pressure
Air Intake Temp
Timing Advance
Mass Air Flow
Fuel Level
Barometric Pressure
EVAP System Vapor Pressure
Fuel Trim
Note:
Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer s implementation.