BQLZR Inching/Self-lock/Interlocked 12V 16Channel RF 433MHZ Wireless Relay Remote Control Switches Two 16-Key Transmitters & 4 Receiver

Description

Transmitter
Operating Voltage: 12V
Operating Frequency: 433Mhz
Battery Type: 12V 23A(not included)
Remote Distance: 150m
DIM: 130 x 50 x 18mm(L x W x T)
Receiver
Input Voltage: DC 12V
Max load: 7A
DIM: 120 x 50 x 15mm(L x W x T)
Brand Name:BQLZR
Weight:264g

Operation Way and Steps:
1. Factory Default is Inching Mode.
Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2.Self- lock Mode:
Press the button A, the Receiver A (Relay A) turns on; Press the button A again, the Receiver A (Relay A) turns off.
3.Inter- lock Mode:
Press the button A, the Receiver A (Relay A) turns on; Press the button B, the Receiver B (Relay B) turns on, the Receiver A (Relay A) turns off.

Change the factory default mode to other two working mode
1. Clear:
Press and hold the learning button on the receiver board, for several seconds, till there is a sound, then release the learning button. It means clearing succeed, previous mode will not work after clearing successfully.
2. Choose the Working Mode:
There are four solder pins and 2 jumper caps on the receiver board.
1)Use the Jumper cap to cover position "3" & "4", leave the position "1" & "2" empty, all the 16 relays¡¯ working mode is Inching Mode
2) Use the Jumper cap to cover position "2" & "4", leave the position 1 & 3 empty, all the 16 relays¡¯ working mode is Self-lock Mode.
3) Use the Jumper cap to cover position "1" & "3", leave the position 2 & 4 empty, all the 16 relays¡¯ working mode is Inter-lock Mode.


Package Includes:
2 x Transmitters (Battery is not included)
1 x Receiver
1 x Case
1 x Cable
1 x Screwdriver