Anypro the Safest Car Jump Starter 600A Peak 15000mAh Car Jumper with Smart Clips

Description

Anypro--Make Things More Professional!

Explanation and Solution for not being Charged Fully
Explanation:
1. To prevent the jump starter from being overcharged,we use MPS26123 chip to set time protection function for safe charging for the mains, namely, the battery will automatically start power-off protection (stop charging) after every 5 hours charging, no matter whether the mains is fully charged.

2.The new inactivated battery needs more hours to be charged fully.

Solution:
After charging the mains for 5 hours, unplug the charger and recharge with 30 seconds break.

Preparatory work before jump starting an engine for the first time:
1.To get the best starting effect, the starter should maintain a fully charged state.
2.How to correctly charge the mains?
Plug the charger into the mains, unplug it after 5 hours and then plug the charger into the mains again.
3.How to recognize whether the mains is fully charged?
Unplug the charger then plug the charger into the mains, if the four power indicator lights are on it means the mains is fully charged.
Specifications:
Battery Type:Polymer Lithium
Battery Capacity:15,000 mAh
Peak Current:600A
Jump Start Current:300A
Input:12V1A
Output:12V Jump Start a car,5V/2.1A smart USB Ports,19V/3.5A Notebook,
Battery Life Cycles:Over1000
LED: 90 Lm

NOTE:
keep at least 75% power when start an engine.
Wrong connection and butt joint of the +- poles are totally prohibited under M-MODE.
Disconnect the clips immediately once the engine is started.