3D Printer Accessories Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor for E3D V6 MK8 Makerbot Nozzles(For Makerbot Nozzle)

Description

SPECIFICATIONS:
Compatible nozzle(Optional): For Makerbot, for Ultimaker, for MK8, for E3D/ E3DV6
Weight: 12g
Signal line: 1m/39.37inch

AUTO LEVELING PARAMETERS DESCRIPTION:
1. X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
2. Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
3. Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
4. Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
5. Probe open angle: the angle of the servo for the leveling probe when the probe is deployed/down (can ignore this when not in use)
6. Number of leveling points: The number of probe points that probe on the plane. The actual number of detected points is equal to the square of the set value. For example, if set to 4 points, 16 points are actually detected, and the maximum is 9, namely 81 points.
7. Probe trigger mode: Set the level state when the leveling probe is triggered.

PACKAGE INCLUDED:
1 x Auto-leveling module
1 x 1 meter signal line

NOTE:
Do not use the leveling sensor when the nozzle temperature is higher than 45 degrees!!!