3 Axis CNC Kit Nema23 Stepper Motor (Dual Shaft) 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

Description

package include:  

3 x 23HS2430B Nema stepper motor 425oz-in 112mm 3A (Dual Shaft)

3 x FMD2740C stepper motor driver

1 x 400W 36V/9.7A switching power supply

1 x 4 Axis USBCNC breakout board

1 x Hand controller 

1 x USB Cable

CD include with English user manual and software and register code 

Ps:This cnc kit only support USB CNC Software,not support Mach3 Software,when install the software need the right register key to run pls contact for it!

1.  USBCNC breakout board

2) Computer system requirement      

Minimum configuration:

1) CPU:1GHz

2) Memory: 512MB

3) 500MB free disk space

2. FMD2740C stepper motor driver

2,Features

1. Power supply voltage 12 to 40VDC                 

2. Subdivision precision 281632641281020 optional  

3.Maximum drive current is 4A

4.Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor             

Applications

Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, SMT machine, etc.

Strengths connection port

SignalFunction

VIN+12to50 v dc power supply input +end,it is recommended to use 36V3A

3. Stepper Motor

General Specification:

Step angle accuracy:+ -  5%(full step,not load)

Resistance accuracy: + - 10%

Inductance accuracy:+ - 20%

Ambient temperature -----------20deg  ----  +50deg

Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length;back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)

4.Switching power supply

400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36v/9.7 A,single output switching power supply