28 LEDs Wireless Solar Motion Sensor Light Waterproof Security Lights, Powerful Safelight for Outdoors, Outside Wall, Garden, Patio, Yard, Pathway Weatherproof Outdoor Lighting by Neloodony

Description

Product Features
1. Integrated design of PIR motion sensor and night sensor.
2. Recharged by Sunlight and store power for overnight lighting.
3. 8 hours charged needed under ideal bright sunlight for over 5 hours lighting time.
4. Waterproof IP 65 and durable.
5. Intelligent Energy-saving.

Operation Instructions
1.Unlock and activate the solar light:
The internal battery is locked from factory for safety shipment, so users have to use supplied Key pin to click the "on/off" Switch hole and unlock the battery and lighting system.
2.Charging via solar panel:
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass. Normally it can be fully charged in one day under ideal bright sunlight.
3.Night sensor function
It will auto turn on in darkness or at night, and auto turn off when in daytime or bright area.

Special Notes
1.For the first use, please take off the transparent protective film first, then fully charge the solar light at least for 5 hours under the direct sunlight.
2.NO DIM MODE. Only Two modes: on/off.
3. If there is no good sunlight or in winter sunlight, especially countries in the north, it may take longer time to fully charge the device, and this is very normal for solar products.

Product Parameters
1. Solar Panel: 0.55W
2. Li-ion battery: 3.7V, 1200mAh
3. LED Power: 0.2W, 6000K-6500K, 28pcs, 24-26lm/pcs
4. Motion angle and distance: 120 degrees, 10ft
5. Weight: 6.77 ounces
6. Size: 5.1*4.3*2.7 inches
7. Working mode: Automatically turn off after lighting on around 30 seconds.

Package Content
4 x Neloodony Solar Motion Sensor Light
2 x Expansion Pillar-hinge
2 x Installing Screws
1 x key pin
1 x Manual