252 LED 12 Volt Color Changing Replacement Swimming Pool Light Bulb

Description

A one year warranty is provided with each bulb but does not cover the damage due to the wiring of a bulb to a system of different voltage. Bulb fits most housings that accept a R40 sized bulb with standard Edison base.All bulbs have been tested, recorded and assigned a serial number. Upon request a buyer can email the serial number to receive the performance test video for that specific bulb. Start-up • In case of colored lamps, 16 pre-programmed effects and combinations may be selected using the on/off switch of your pool lights. Just switch off and switch on within 2 seconds. • If the light is powered off for more than 20 seconds, it will keep the latest program when it is turned on again. • To achieve synchronization, confirm all lamps are installed correctly on the same switch, after they are powered off for more than 20 seconds, switch on and switch off continuously three times, and then finally turn them on again. They will all go to program 5. Now you can select a program for them by switch off and on within 8 seconds. • Alternatively, we recommend using our optional controller (with in-built safety transformer) which comes with (a) remote control for easy operation and (b) auxiliary connection of 24V for operation of any other electrical item. Safety Warnings The persons who are in charge of installation should have the required qualifications for this type of work. • Avoid making contact with the electric voltage. • Comply with the current standards regarding accident prevention. • IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING, SWIMMING POOLS. • Replacement must be performed with the lamp disconnected from the electric power system. • Do not handle any electrical components with wet feet.